Novosbed Logo Douglas Logo L&C Logo Recore Logo

Product Warranty Information

15 Years Non-Prorated Brunswick Mattress Warranty Inc. warrants each Brunswick Mattress against defects in workmanship and materials for a period of 15 years; Non-Prorated. If, during the Warranty period, your mattress is found defective due to faulty workmanship or materials, it will be repaired or replaced subject to the details below.

Warranty Highlights

  • The Warranty period for your Brunswick mattress begins on the date of purchase and ends 15 years later.
  • Repair or replacement of your Brunswick mattress does not extend the Warranty nor begin a new Warranty period.
  • Your Brunswick mattress must be unpacked and expanded no more than two weeks after the date of delivery.
  • Due to the handcrafted nature of your mattress, variances in the dimension of your mattress might be present. Only discrepancies over 1” are covered by this warranty within the warranty period.
  • Do not fold, stand or jump on your Brunswick mattress.
  • Spot cleaning is the only allowable cleaning procedure for your Brunswick mattress; machine washing or drying, ironing, bleaching, and dry cleaning are not allowable and stand as Warranty waivers.
  • Your Brunswick mattress must be continuously supported by an adequate foundation and an appropriate frame with centre support beam and adequate leg support.
  • If, despite normal usage and proper handling, your Brunswick mattress forms permanent indentations of more than 2 inches in the Warranty period, it will be replaced according to the terms below.
  • Your Brunswick mattress cover has an ultra plush cover. Damage to the fabric or seams due to faulty workmanship or imperfections shall be covered by this Warranty. Any damages resulting from the normal wear and tear of the ultra plush cover, including, but not limited to: frayed threads, pilling, discolouration, and pattern stretching, are not covered by this Warranty.
  • Brunswick will require that you take certain photos and measurements of your Brunswick mattress, your foundation, and your frame in addition to answering a Warranty questionnaire to process a Warranty claim. Failure to take these photos, answer the questionnaire adequately and/or perform these measurements will result in rejection of your Warranty claim.

Full Warranty Details

15 Years Non-Prorated Full Replacement Warranty

Your Brunswick mattress will be conditionally repaired or replaced at no cost within the Warranty period.

This warranty is conditional and subject to the following:

  1. Your mattress has a defect which is specifically due to faulty workmanship or materials; and,
  2. Guidelines of handling the Brunswick mattress as set in this Warranty document are met by the purchaser.


This Warranty is valid only to the original purchaser of the product as indicated on the original sales receipt. The law tag must not be removed from the original product as this identifies the product for the purpose of the warranties contained herein. This Warranty is only valid if you unpack and expand your Brunswick mattress within the two weeks following the original date of delivery.

Brunswick mattresses must not be used on floors susceptible to moisture build-up such as concrete, below-grade (basement), or on floors in humid environments. Such inappropriate use can result in mold growth on the bottom of the mattress and will void your Warranty. Brunswick mattresses are designed for use on firm surfaces, non-spring foundations or adjustable bed bases that are structurally capable of supporting the weight of purchaser’s mattress, foundation, and user(s).

The purchaser must use their Brunswick mattress on a foundation that allows air to circulate beneath it.

It is the purchaser’s responsibility to maintain an adequate foundation and provide appropriate support for the mattress. Substitution or use of an improper foundation or other base upon which the mattress is placed may result in premature wear and damage to the product thereby voiding this Warranty. Purchasers using a bed frame must ensure it provides sturdy support for both the mattress and foundation ensuring it has a centre support and having at least 5-6 legs. Purchasers using their mattress directly on a slatted bed system must ensure that the slats are a minimum of 2 inches in width, and have gaps between them of no more than 3 inches. Queen, King, and California King platform beds and slat system bed frames used in conjunction with your Brunswick mattress require at least one centre support beam. Platform beds and adjustable bases made of wired metal are not acceptable for use with Brunswick mattress.

This Warranty covers the following items during normal wear:

  1. Permanent indentations: Deterioration causing the mattress to have visible and permanent indentations greater than 2 inches that is not associated with an indentation or sag which has resulted from the use of an improper or unsupportive foundation.
  2. Physical flaws: Any physical flaw in the mattress that causes the foam material to split or crack, despite normal usage, and proper handling.

This Warranty will not apply and shall be considered Null and Void if the Mattress is Subjected to abuse or improper care such as, but not limited to:

  1. Damage from use with an inadequate foundation and/or frame.
  2. Mold or mildew caused from use of the Brunswick Mattress on a non breathable surface.
  3. Damage due to abuse, misuse or unsanitary treatment beyond reasonable use including, but not limited to, burns, cuts, tears, stains, bodily fluids, soiling, spots or spills.
  4. Using a base without a centre support/leg.
  5. Damage resulting from the relocation of the Brunswick Mattress within or from the original residential address.
  6. Damage resulting from any cleaning method other than the allowable spot cleaning.
  7. Damage resulting from jumping on, folding, or keeping in a standing position the Brunswick Mattress.

This Warranty does not cover:

  1. Normal increase of softness which can occur during regular use.
  2. Body indentations less than 2 inches.
  3. Variances in any of the dimensions (Length; Width and Height) of 1 inch or less.
  4. Complications resulting from use or inability to use product including, but not limited to, allergies, back pain, chiro alignments, and fibromyalgia.
  5. Individual comfort preferences.
  6. Height of bed due to purchaser’s bed frame or headboard.
  7. Bedding height and sheet fit.
  8. Bent border wire due to mishandling.
  9. Mattress handles (These are for positioning only and not designated to bear the full weight of the mattress)
  10. Compensation for loss of use.
  11. Transportation charges to and from factory unless specified in this agreement.
  12. Replacement of an accompanying Brunswick product where only one item is defective, unless that accompanying item is also defective.
  13. We do not warrant our product as a remedy for aches, pains or other health issues.
  14. We do not warrant our product when used for commercial or institutional purposes.

Supporting Documentation Required To Process Warranty

  1. Photos
    1. Measuring Indentations and/or variance in dimensions: Brunswick will require that the purchaser provide photos demonstrating the indentation by laying the product directly on a flat floor, and measuring the vertical distance from a flat and level string pulled tightly across the product and lightly contacting the product on opposite sides, to the lowest point of the indentation using a clearly demarcated measuring device; and,
    2. Demonstrating proof of adequate foundation and bedframe usage as outlined in this Warranty; and,
    3. Demonstrating proof of Physical flaws: Brunswick will require several photos of any physical flaws that are the origin of a Warranty claim. Photos will vary depending on the physical flaw being reported; and,
    4. Demonstrating proof that the bottom side of the Brunswick Mattress is free from mould and Mildew.
  2. Completed Questionnaire

Repairs and Replacements

In the event of a Warranty claim is approved by Inc., and your mattress is found defective due to faulty workmanship or materials it will be repaired or replaced at Inc.’s option

In the event a Warranty replacement is deemed necessary, purchaser will be required to surrender the original product to Inc. at the time of replacement.

The warranties contained herein include the costs of shipping and handling, which are to be borne by Inc..

Additional shipping charges may apply if the mattress has been moved from the original shipping destination, or if the original shipping destination is in a remote location.

Should this Warranty be exercised and your product is replaced and/or repaired, the Warranty for the replacement product will be in effect for the duration of the original Warranty only.

Our representatives or designated agents shall make the final determination regarding repair or replacement.


Terms and services related in this Warranty shall be the purchaser’s sole and exclusive remedy should the product fail during the time frame stated herein. Inc. shall not be liable for incidental or consequential damages which result through the use of this product. We make no warrant beyond those terms and conditions stated, and reserve the right to update this Warranty at our discretion.